Zeitronix Hacker Tweaker Displays
1979 to 1993 Mustang
- Gift Ideas & Accessories
- Accessories and Accents
- Body Parts and Sheet Metal
- Books and Manuals
- Brakes
- Convertible
- Cooling System
- Custom Tuning and Calibration
- Decals
- Electrical
- Emblems
- Engine 5.0L/5.8L
- Exhaust
- Fire Suppression System
- Fuel System
- Heat and Air Conditioning
- Ignition
- Interior
- Lighting
- Locks and Lock Sets
- Lubricants
- Paint and Restoration Supplies
- Sound and Heat Insulation
- Stripe Kits and Decals
- Superchargers
- Suspension and Steering
- Transmission And Differential
- Trunk Area Parts
- Turbochargers
- Weatherstripping and Rubber Parts
- Wheel and Tire
- Windshield Wiper and Washer Parts
This is for you, the hard core Hacker/Tweaker who wants to make your car stand out from the crowd with a super stealth and clean in-dash installation. So file, grind and glue until you have a clean, integrated, in-dash wideband AFR display.
The Zeitronix Hacker/Tweaker is a very small AFR or Lambda display for the Zt-2 or Zt-3 Wideband Systems. Designed to fit into tight spots, full board dimensions are less than 2" by 1". The minimum opening to display the digital readout is only 0.56 x 1.4 inches. It's an open frame and bare board display meant to be mounted in the dash, in place of a stock clock or wherever you, the Hacker/Tweaker wants to mount a discrete wideband display. Like all LED displays it requires a tinted foil or Lexan cover. There are two mounting holes for screws or standoffs. It powers up right from the Zt-2 or Zt-3 DATA port.
The Hacker/Tweaker is available in units of AFR or Lambda and blue or red digit colors.
Sizes and Specifications
-Full board dimensions are less than 2" by 1", only 1.975 x .930 inches (50.17 x 23.62 mm),
-Board thickness is approximately 0.5" (12 mm)
-Digit readout area is 0.56 x 1.40 inches (14.22 x 35.56 mm)
-Two mounting holes for #4 (or 3mm) screws.
-Cable length is 5 feet to reach your under dash Zt-2 or Zt-3 and can be extended if necessary
Manufactured / Distributed By: