1965-1966 Mustang Aluminum Radiator, 5.0 L Conversion, Cold Case
1964 to 1973 Mustang
- Gift Ideas & Accessories
- Aftermarket Seats
- Audio
- Billet Accessories
- Body Parts And Sheet Metal
- Body Shells
- Books/Literature/CD ROM
- Brakes
- Bumper
- Convertible Parts
- Cooling
- Cougar Only
- Decals
- Differential
- Door, Engine and Axle Tags
- Door Parts
- Driveshafts, U joints, and Related Parts
- Electrical
- Emblems
- Engine
- Exhaust
- Fuel and Intake
- Glass and Frames
- Grill Corrals, Bars, Ornaments and Emblems
- Grilles
- Hardware
- Heater/Air Conditioning
- Interior
- Lock Parts
- Lubricants
- Mirrors
- Moldings
- Money Saving Kits
- Paint and Restoration Supplies
- Rubber / Weatherstripping
- Sound and Heat Insulation
- Steering / Suspension
- Stripe Kits And Paint Stencils
- Superchargers and Accessories
- Tires
- Transmission And Clutch
- Trunk Area Parts
- Turbochargers
- Wheels And Related Parts
- Windshield Washer and Wiper Parts
Click Any Photo to Enlarge
Aluminum Performance Radiator with the lower rad hose on the Driver's side for your 1964-1965 Mustang using a 1970+ 302/351W of a roller 5.0L/5.8L small block Engine. Ford switched the water pump around on 1970+ small block engines and the lower hose went from the passenger side (65-69) to the driver's side (70+). When swapping a 5.0L type engine into your 65/66 Mustang, you can't re-use your original radiator and need this one. These USA made Cold Case radiators are original appearing and have stock looking tops, but do NOT say "FoMoCo". Once painted, this will look completely original! Just paint it black and you have "fool everyone" originality plus maximum cooling. These radiators are Tig welded, 100 percent aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! They don't cool as well as these oversize 2 row models.
- 100 percent TIG welded
- All Aluminum
- Polished OE style tanks
- 16 fins per inch
- Corrugated fins that give more surface area and more thermal transfer
- Pressure tested
- Direct fitment for 65-66 Mustang w/ 289 V8
- Core Height 16.5 inch
- Core Width 16.25 inch
- Overall Height 20.5 inch
- Overall Width 18.38 inch
- Upper Hose 1.5 inch-* Lower Hose 1.75 inch
- Overall Thickness 3 inch
- Tubes (2) 1 inch Tubes
- Trans Cooler Fitting: 1/8" National Pipe Thread (For AUTO version)
Manufactured / Distributed By:
