1965-1973 Mustang Molding Clip and Door/Quarter Seal Screws
1964 to 1973 Mustang
- Gift Ideas & Accessories
- Aftermarket Seats
- Audio
- Billet Accessories
- Body Parts And Sheet Metal
- Body Shells
- Books/Literature/CD ROM
- Brakes
- Bumper
- Convertible Parts
- Cooling
- Cougar Only
- Decals
- Differential
- Door, Engine and Axle Tags
- Door Parts
- Driveshafts, U joints, and Related Parts
- Electrical
- Emblems
- Engine
- Exhaust
- Fuel and Intake
- Glass and Frames
- Grill Corrals, Bars, Ornaments and Emblems
- Grilles
- Hardware
- Heater/Air Conditioning
- Interior
- Lock Parts
- Lubricants
- Mirrors
- Moldings
- Money Saving Kits
- Paint and Restoration Supplies
- Rubber / Weatherstripping
- Sound and Heat Insulation
- Steering / Suspension
- Stripe Kits And Paint Stencils
- Superchargers and Accessories
- Tires
- Transmission And Clutch
- Trunk Area Parts
- Turbochargers
- Wheels And Related Parts
- Windshield Washer and Wiper Parts
Click Any Photo to Enlarge
Those rubber rectangular door and quarter panel seals usually don't come with the black pan head screws needed to install them. The factory used a smaller #6 screw, not the usual #8 found everywhere else on a Mustang. Your old ones may be too rusty, or may have 12 coats on paint on them so we sell little packages of the proper screws. If the original #6 hole in your door is stripped, don't panic as we also sell the same screw in a "one size up" #8 that will work perfectly in the enlarged hole. The #6 screws are also used to fasten the Convertible Top Boot Molding on the top edge of the back seat.
Manufactured / Distributed By:
Also Found in:
