Trickflow Stage 3 Hydraulic Roller Camshaft
1979 to 1993 Mustang
- Gift Ideas & Accessories
- Accessories and Accents
- Body Parts and Sheet Metal
- Books and Manuals
- Brakes
- Convertible
- Cooling System
- Custom Tuning and Calibration
- Decals
- Electrical
- Emblems
- Engine 5.0L/5.8L
- Exhaust
- Fire Suppression System
- Fuel System
- Heat and Air Conditioning
- Ignition
- Interior
- Lighting
- Locks and Lock Sets
- Lubricants
- Paint and Restoration Supplies
- Sound and Heat Insulation
- Stripe Kits and Decals
- Superchargers
- Suspension and Steering
- Transmission And Differential
- Trunk Area Parts
- Turbochargers
- Weatherstripping and Rubber Parts
- Wheel and Tire
- Windshield Wiper and Washer Parts
Click Any Photo to Enlarge
Specifically designed to match the power characteristics of our Trick Flow cylinder heads for Ford, these Track Heat cams offer state-of-the-art power at an affordable price.
Starting as premium blank cores, the cams are checked for proper hardness, then precision-ground to exacting tolerances. Instead of creating a steep, narrow powerband that falls off very quickly, these cams powerbands achieve maximum area under the curve to enhance the broad torque and horsepower curves of the Trick Flow cylinder heads. Good idle, strong midrange power. Aftermarket intake, heads, and headers recommended. Requires modified mass airflow. Compression ratio: 9:1 to 10.5:1.
Specifications:
- Advertised duration: 286 intake/298 exhaust
- Duration at .050 in. cam lift: 236 intake/248 exhaust
- Gross valve lift: .574 in. intake/.595 in. exhaust
- Lobe separation: 110 degrees
- RPM range: 3,500-7,000
- 1,600 to 2,200 cruise rpm
- 10:1 to 11.5:1 compression ratio recommended
- Rough idle, strong top-end horsepower, 3,000 to 3,500 rpm stall converter, 3.90 to 4.11 gears
Manufactured / Distributed By:
Also Found in:
